Data Acquisition Systems

Owing to the immense experience and a competent team of personnel, we are able to offer Digital Input Module. The offered assembly of digital input modules is made utilizing superior grade raw material and modern machinery in strict compliance with the international quality norms. Along with this, the offered range of digital input modules is checked on different characteristics to ensure that defect-free products are delivered at clients' premises.

Specifications:

• Wide input range DC power supply
• Support ASCII and Modbus RTU protocol
• Supports baud rates from 1.2Kbps to 115.2 kbps
• All 16 channels digital input ca be used as counter
• Digital output signal with 3750Vrms isolation protection
• Dual watchdog: Module’s firmware, host computer traffic
• LED for each channels working status
• DIN rail and panel mount support
• Configured and self-test by outer dip-switch
• Support screw terminal and external DC power adapter

Additional Information:

Item Code: TRP-C26

Delivery Time: Immediate Delivery

• Protocol USB 2.0 TCP/IP, MODBUS RTU, MODBUS TCP ASCII Command
• Support USB 2.0, 10/100 Ethernet, RS485/232C, CAN(Optional)
• Fully Photo-Isolation 3750Vrms
• Wide Supply Voltages (10~30V)

• Communication: USB 2.0, 10/100 Ethernet,RS485/232C, CAN (optional)
• Protocol: TCP, UDP, DHCP, ARP, MODBUS RTU,
• LED Indication: LED for Power , USB, Ethernet and 32 LEDs as
• Digital indicators
• Isolation Voltage: 3000VDC

• Effective Resolution: 16-bit
• Input Channels: 16 channels Analog input
• Input Type: Voltage, Current
• Input Range: ±10V, ±5V, ±2.5V, ±1V, ±500mV,±15mV, 0~20mA, 4~20mA
• Sampling Rate: 10 Samples / Second
• Input Impedance: 10Mohm
• Accuracy: ±0.05% or better
• Zero Drift: ±20uV/ °C
• Span Drift: 25 ppm/ °C

• Input Channel: 2 Channels
• Input Type: Voltage or Switch On/Off
• Input Impedance: Logic Low : 0 < Vin < 3Vdc & Logic High :
• 5V < Vin < 24Vdc)
• Isolation Voltage: 2000V

• Output Channel: 1 channel
• Output Type: Open collect to 30Vdc/3A(max)
• Isolation Voltage: 2000V

• Consumption 1.5W/ Typical, 2W/max
• Power Input USB powered (400mA max.) or external unregulated
• +10 ~ +30VDC
• Humidity 5 ~ 95% RH, non-condensing

• Automatic data flow control
• Alarm function
• Input optical isolation
• High operational fluency

• Power Input Voltage: DC +10V to +30V.
• Protocol: ASCII and Modbus RTU
• Input channel: 16 digital input channels with counter
• Input digital input counter: 0~65535
• Input optical isolation: 3750 Vrms
• Input logical level 0 +1V (max).
• Input logical level 1 +4.0V ~ +30V
• Communication interface: RS-485.differential 2 half.duplex wires
• Communication speed: Baud rate from 1200bps to 115.2Kbps
• Data format: Data bit: 8,Parity Check: None, Sto Bit: 1
• Input impedance: 3KΩ
• Inputs can be use as counter channel: 16
• Counter frequency: 100 Hz
• Dual watchdog Hardware reset circuit, module and host operating status.
• Signal LED: Power on, all input channels
• Power supply: Screw terminal, or standard external DC adapter
• Power consumption: 1.5W (max)
• Operating environment: -10 to 50
• Storage temperature: -20 to 70
• Humidity: 10-90% non-condensing
• Dimension: 151mm X 75mm X 26mm
• Weight: 395g

Additional Information:

Delivery Time: Immediate delivery

• Consist of support screw terminal
• Panel mount support

• Automatic data flow control on RS-485
• Baute rate up to 115.2K(bps)
• Alarm function with high/low alarm output
• Programmable host watchdog timer for host failure protection
• 6 differential and 2 single-ended or 8 differential analog input
• Support 60 samples/second (12bit) fast sampling rate
• Support EDAM ASCII format protocol(default) and Modbus-RTU protocol
• Fully photo-isolation 3750Vrms

• Communication: RS-485,2 wires
• Baute rate: 1200,2400,4800,9600,19.2K,38.4K,115.2K
• Protocol: EDAM ASCII (default) and Modbus-RTU protocol

• Input channels: 6 differential and 2 single-ended or 8 differential
• Resolution: 16-bit/12-bit
• Voltage range: +/- 10V,+/-5V,+/-1V,+/-500mV, +/-150mV
• Current measurement: +/-20mA (with external 125 ohms shunt resistor)
• Sample rate: 10 samples/sec (16-bit) for normal mode
• 60 samples/sec (12-bit) for fast mode
• Bandwidth: 15.72Hz (normal mode), 78.6Hz (fast mode)
• Zero drift: 0.03 uV/C
• Span drift: 25 ppm/C
• Accuracy: 0.1% or better (normal mode)
• CMRR:92 dB min. @50/60Hz
• Photo-isolation: 3750Vrms
• Isolation voltage: 3000VDC

• Power supply: +10VDC ~ +30VDC
• Over voltage protection: +/- 35V
• Power consumption: 1.4W
• Compatible: I-7017(F) / ADAM 4017

In order to comprehend and meet the diverse requirements of respectable clients, we are able to offer 8 Channel Analog Input RS 485 Module. The offered range analog input modules is designed utilizing optimum grade raw material, which is sourced from reliable vendors of the market. Along with this, the offered range of analog input modules is tested on different characteristics to ensure its conformation with the international quality standards and norms.

Specifications:

• Wide input range DC power supply
• Support ASCII and Modbus RTU protocol
• Supports baud rates from 1.2 Kbps to 115.2 kbps
• All 16 channels digital input ca be used as counter
• Digital output signal with 3750 Vrms isolation protection
• Dual watchdog: Module’s firmware, host computer traffic
• LED for each channels working status
• DIN rail and panel mount support
• Configured and self-test by outer dip-switch
• Support screw terminal and external DC power adapter

Additional Information:

Delivery Time: Immediate Delivery

In order to meet the assorted demands of respectable clients, we are able to deliver Digital I/O Module The offered range of digital I/O modules is designed & developed utilizing optimum grade components, sourced from trusted vendors of the market. Along with this, the offered range of digital I/O modules is strictly checked on myriad parameters to ensure its adherence with the benchmarks of quality.

Specifications:

• Input channel: 8 digital input channels
• Input optical isolation: 3750 Vrms
• Input logical level 0: +/-1V (max)
• Input logical level 1: +/- 4.0 V ~ +/- 30 V
• Digital Input can be used as counter channel: 8
• Input-counter: Dec 0~65535(max) or Hex 0000 ~ FFFF(max)
• Input impedance: 3 K ohm
• Input counter frequency: 100 Hz
• Input distance: 500 M (max)
• Digital output maximum voltage: +/-30 V
• Output Maximum current: 100 mA
• Digital output isolation: 3750 Vrms
• Communication interface: RS-485
• Communication speed: Baud rate from 1.2 kbps to 115.2 kbps
• Dual watchdog: Hardware reset circuit, module and host operating status
• Signal LED: Power on, all channels
• Power supply: Screw terminal/external DC adapter
• Connection type: Screw terminal and accepts AWG #12~320 wires
• Power consumption: 1.2 W
• Operating environment: -10 to 50
• Storage temperature: -20 to 70
• Humidity: 10-90% non-condensing
• Dimension: 151 mm X 75 mm X 26 mm
• Weight: 400 g

• Panel mount support along with DIN rail
• Consist of support screw terminal

• USB directly power supply input
• System get a serial com port when USB plug in
• Support ASCII and Modbus RTU protocol
• Supports baud rates from 1.2Kbps to 115.2 Kbps
• All 8 channels digital input ca be used as counter
• Digital input signal with 3750 Vrms isolation protection
• Dual watchdog: Module’s firmware, host computer traffic
• LED for each channels working status
• DIN rail and panel mount support
• Configured and self-test by outer dip-switch
• Support screw terminal

We are an eminent name, which is engaged in offering 4 Channel Digital Input Relay Output RS485 Module to the clients. The offered range of digital input relays is manufactured utilizing high grade raw material and advanced machinery in strict compliance with the industry laid norms and standards. Additionally, the offered range of digital input relays is suitably checked on different parameters to ensure that defect-free products are delivered at customers' premises.

Specifications:

• Wide input range DC power supply
• Support ASCII and Modbus RTU protocol
• Supports baud rates from 1.2 Kbps to 115.2 kbps
• All 16 channels digital input ca be used as counter
• Digital output signal with 3750 Vrms isolation protection
• Dual watchdog: Module’s firmware, host computer traffic
• LED for each channels working status
• DIN rail and panel mount support
• Configured and self-test by outer dip-switch
• Support screw terminal and external DC power adapter

Our customers can avail Digital I/O Card from us. The offered range of digital I/O cards is made utilizing high grade raw material and innovative techniques in strict conformation with the international quality norms. Along with this, the offered range of digital I/O cards is highly appreciated for its durability, high performance, superior efficiency and compact sizes.

Specifications:

• 12 V inputs
• 16 digital inputs, 24 V, isolated and 14 interruptible
• 16 digital outputs, 24 V, isolated, 10 to 36 V and 500 mA/channel
• Optical isolation 1000 V
• Watchdog for resetting the outputs to "0" (when power-on)
• Protection against fast transients, over voltage, electrostatic discharge and high-frequency EMI
• Inputs: Voltage reversal, input filters
• Outputs protected against short circuit
• Over temperature and over voltage protection
• Diagnostic report in case of short circuits, over temperature and voltage drop
• 24 V power outputs with protection diodes
• Shutdown logic when the external supply voltage drops below 5 V

• Excellent communication speed
• Longer working life

• Power Input Voltage DC +10V to +30V.
• Protocol: ASCII and Modbus RTU.
• Digital output maximum voltage:+30V.
• Digital output maximum current: 100mA.
• Digital output isolation: 3750Vrms.
• Communication interface: RS-485 differential 2 half/duplex wires.
• Communication speed form 1.2Kbps to 115.2Kbps auto-switching.
• Data format: Data bit: 8,Parity Check: None,StopBit:1
• Distance: up to 4000ft ( 1200M ).
• Connection type: Screw terminal for maximum AWG 12 wire.
• Signal LED: Power, and all output channels.
• Power supply: Screw terminal, or external DC adapter.
• Power consumption 1.5W.
• Operating environment: 0 to 50
• Storage temperature:. -20 to 70
• Humidity: 10~90% Non-condensing.
• Dimension: 151mm X 75mm X 26mm .
• Weight: 395g