Modbus Gateway

This Modbus Gateway allows the legacy Modbus RTU/ASCII devices to operate on a Modbus TCP network. It allows either Modbus serial master or slave to communicate with Modbus TCP’s slave or master.

MODBUS TCP to RTU/ASCII Gateway

REQUEST CALLBACK
MODBUS TCP to RTU/ASCII GatewayClick to Zoom

Ask for Price

MODBUS TCP to RTU/ASCII Gateway

Specifications:

  • Serial Connector: 1 x DTE - DB9 Male
  • RS-232: TX, RX, RTS, CTS, DTR, DSR, DCD, GND
  • RS-422: TX+, TX-, RX+, RX-, RTS+, RTS-, CTS+, CTS-, GND
  • RS-485: Data +, Data –, GND
  • Data Rate: 110 bps ~ 230.4 kbps
  • Data Bits: 5, 6, 7, 8
  • Parity: None, Even, Odd, Mark, Space
  • Stop Bits: 1, 1.5, 2
  • LAN: 10/100 Mbps Auto-detecting - 10 Base T, 100 Base TX
  • Protocols: TCP, IP, ARP, DHCP, Telnet, HTTP, UDP, ICMP
  • Management: Manager Software, Serial Console, Telnet, Web Server Firmware Upgradeable
  • Power Input: 7 ~ 30 VDC
  • DIN-Rail or Panel Mount
  • Supports LAN and WAN Communications
  • Management Access Password Protected
  • Supports up to 8 MODBUS TCP Master to MODBUS RTU/ASCII
  • Supports Inactive Timeout
  • Supports Loop Back Mode
  • Operating Temperature: 0° ~ 50°C
  • Storage Temperature: -20° ~ 60°C
  • Humidity: 0% ~ 90% Non-Condensing
  • Approvals: FCC, CE

Additional Information:

Item Code: STM-501C

Yes! I am Interested

View PDF

MODBUS TCP to Serial RTU/ASCII Gateway

REQUEST CALLBACK
MODBUS TCP to Serial RTU/ASCII GatewayClick to Zoom

Ask for Price

MODBUS TCP to Serial RTU/ASCII Gateway

Specifications:

  • Serial: Auto switching RS-232/422/485 signal interface
  • Baud rate from 1200~921600Kbps
  • Surge protection and over current and over voltage on RS-422/485 data lines
  • Auto fast direction RS485 flow control by hardware
  • LAN: Auto-MDIX, 10/100 Mbps Auto-detecting
  • Fully compatible with Ethernet and TCP/IP protocol
  • Modbus Type support TCP Master to Serial Slave and TCP Slave to Serial Master
  • Support 1 serial master to 8 TCP slave ,each TCP slave can free set up UID from 0~256
  • Compatible with Modscan32, Modbus Poll, CAS Modbus Scanner and SCADA application
  • Support virtual com maximum connection 16 client
  • Configuration mode: Trycom Device Manager, WEB settings
  • Support configuration by serial console
  • Update the firmware from LAN
  • Built-In watchdog function prevents system boot fail
  • Support Auto-MDIX twisted pair crossover detection and Auto-Correction
  • Power/Link/UART RX/UART TX mode LED indicator
  • Heart Beat function ensures a reliable communicating connection
  • Auto reconnection when power or Ethernet fail
  • Back to factory configuration by external switch
  • Power Input Voltage: DC +10V to +30V
  • Plug-in screw terminal wiring: Accepts AWG #12 ~30 wire
  • Operating Temperature: -10 to 65°C
  • Humidity: 0~90% Non-Condensing

Additional Information:

Item Code: TRP-C37M

Yes! I am Interested

View PDF

MODBUS TCP to 4-Port RTU/ASCII Gateway

REQUEST CALLBACK
MODBUS TCP to 4-Port RTU/ASCII GatewayClick to Zoom

Ask for Price

MODBUS TCP to 4-Port Serial RTU/ASCII Gateway

Specifications:

  • Serial Connector: 4 x DTE - DB9 Male
  • RS-232: TX, RX, RTS, CTS, DTR, DSR, DCD, GND
  • RS-422: TX+, TX-, RX+, RX-, RTS+, RTS-, CTS+, CTS-, GND
  • RS-485: Data +, Data –, GND
  • Data Rate: 110 bps ~ 230.4 kbps
  • Data Bits: 5, 6, 7, 8
  • Parity: None, Even, Odd, Mark, Space
  • Stop Bits: 1, 1.5, 2
  • LAN: 10/100 Mbps Auto-detecting - 10 Base T, 100 Base TX
  • Protocols: TCP, IP, ARP, DHCP, Telnet, HTTP, UDP, ICMP
  • Management: Manager Software, Serial Console, Telnet, Web Server Firmware Upgradeable
  • Power Input: 9 ~ 15 VDC
  • Supports LAN and WAN Communications
  • Management Access Password Protected
  • Supports Inactive Timeout
  • Supports Loop Back Mode
  • Operating Temperature: 0° ~ 50°C
  • Storage Temperature: -20° ~ 60°C
  • Humidity: 0% ~ 90% Non-Condensing
  • Approvals: FCC, CE

Additional Information:

Item Code: STM-504C

Yes! I am Interested

View PDF
 

Our Products
Corporate Brochure